5 Series E60 535i (N54) SAL
13 62 531
Replacing coolant temperature sensor (N54)
Warning!
Danger of scalding!
Only perform these tasks on an engine that has cooled down.
Recycling
Catch and dispose of escaping oil and coolant.
Observe country-specific waste-disposal regulations.
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
Remove acoustic cover
Note:
Coolant temperature sensor is mounted on cylinder head at front.
Unlock plug (1) and remove.
Release temperature sensor (2).
Installation:
Tightening torque 13 62 1AZ
.
If necessary, top up coolant.
Check cooling system for leaks.
RA Replacing coolant temperature sensor (N54)
BMW AG - TIS
22.02.2013 02:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
