5 Series E60 535i (N54) SAL
Cut exhaust pipes at marked points with special tool 00 2 210
and deburr.
Release nuts and replace during installation.
Installation:
Tightening torque, 18 00 1AZ
.
Installation:
Connect exhaust pipe to centre muffler by means of clamp and
align.
Align clamp and tighten down.
Tightening torque 18 00 5AZ
.
Note:
Check exhaust system for leaks.
RA Removing and installing/replacing exhaust pipe with catalytic converter (N54)
BMW AG - TIS
22.02.2013 03:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -