5 Series E60 535i (N54) SAL
Necessary preliminary tasks:
•
Disconnect battery
•
Remove reinforcement plate.
•
Remove exhaust system.
•
Support engine with lifter.
Remove heat shields (1) and (2).
Release screws (1).
Disconnect connector (2).
Steel screws, tightening torque 23 00 1AZ
.
Aluminium screws, tightening torque 23 00 2AZ
.
Release aluminium screws with special tool 00 9 010 .
Unclip cable (1) from holder.
Release screw (2) and remove holder (3).
Note:
Illustration similar
RA Removing and installing transmission (GS6-53DZ) N54
BMW AG - TIS
22.02.2013 03:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
