5 Series E60 535xi (N54) SAL
Install special tool 11 4 341 with special tool 11 4 345 .
Installation:
1 cyl is marked.
Fit special tool 11 4 342 with bolts (1), insert knurled screw in
direction of arrow.
Sealing flange must rest flat.
Secure special tool 11 4 344 with bolts (1).
Note:
Compressed air at valve (2) must not exceed 3 bar .
Heat cylinder head to 60
°
.
Check for bubble formation in a water bath.
Assemble engine.
RA Check cylinder head for water leaks (N54)
BMW AG - TIS
22.02.2013 05:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
