5 Series E60 535xi (N54) SAL
Adjust oil nozzle.
Release screw (1).
Tightening torque: 11 11 5AZ
.
Remove bearing shells (2) and (3).
Note:
Guide bearing shell (3) is a thrust bearing.
Observe bearing classification.
Installation:
Bearing shell (1) with lubricant groove must be fitted in crankcase
upper section.
Bearing shell (2) without lubricant groove must be fitted in
crankcase lower section (bedplate).
Bearing classification (1) of crankshaft as per table (values 1 to
3).
Bearing classification (2) of connecting rods as per table (values
b and r).
RA Replacing all crankshaft main bearings (N54)
BMW AG - TIS
22.02.2013 05:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -