5 Series E60 535xi (N54) SAL
11 61 050
Removing and installing intake air manifold
(N54)
Necessary preliminary tasks:
•
Remove tension strut.
•
Remove suction filter housing.
•
Remove engine cover.
Detach crankcase breather at cylinder head cover (1).
Pull off vacuum hose (1).
Detach tank vent valve (2) from mounting.
Release hose (3) and set down in engine compartment.
Disconnect plug connection (1) on oil pressure switch.
RA Removing and installing intake air manifold (N54)
BMW AG - TIS
22.02.2013 06:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
