5 Series E60 535xi (N54) SAL
Seal fuel lines with special tools 13 5 281 and
13 5 282 .
Slacken nut (1).
Release screw (2).
Installation:
•
Replace aluminium screw.
Remove feed line (3).
Seal feed line with matching plug from special tool kit 32 1 270 .
Warning!
Wear full face guard and protective gloves.
Slacken nut (1).
Slacken nut (2).
Release screw (3).
Disconnect high-pressure line (4).
Seal connections of high-pressure line (4) with matching plugs
from special tool kit 32 1 270 .
RA Removing and installing or replacing high-pressure fuel pump (N54, N53)
BMW AG - TIS
22.02.2013 06:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -