5 Series E60 535xi (N54) SAL
Cut exhaust pipes with special tool 00 2 210 and with standard
workshop equipment at marked points and deburr.
Installation:
Connect centre muffler to both exhaust pipes by means of clamps
and align.
Align clamps and tighten down.
Tightening torque 18 00 5AZ
.
Installation:
Connect centre muffler to rear muffler by means of clamp and
align.
Align clamp and tighten down.
Tightening torque 18 00 5AZ
.
Note:
Check exhaust system for leaks.
RA Removing and installing/replacing centre muffler (N54)
BMW AG - TIS
22.02.2013 07:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -