5 Series E60 535xi (N54) SAL
Release screws.
Installation:
Tightening torque, steel screws 24 00 1AZ
.
Aluminium screws must be replaced.
Tightening torque and angle of rotation
Aluminium screws 24 00 2AZ
(3, 4, 5, 9, 10)
Screw 10 only on N54.
Installation:
Secure angle of rotation special tool 00 9 120 with magnet
00 9 130 to floor plate.
Screw down aluminium screws according to angle of rotation.
Angle of rotation 24 00 2AZ
.
Installation:
Bore (1) in driving disk must be accessible from opening on
engine oil pan.
Check that dowel sleeves are correctly seated.
Replace damaged dowel sleeves.
RA Removing and installing automatic transmission (6HP19Z AWD) N54
BMW AG - TIS
22.02.2013 08:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -