bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

7 RA Removing And Installing_replacing Vane Pump For Power Steering (N54)|Page 1160 > < 6 RA Checking Function Of Power Steering Vane Pump|Page 1158
Page 1
background image

32 41 060

Removing and installing/replacing vane pump
for power steering (N54)

Warning!

Danger to life!

Secure engine in installation position to prevent it from falling
down.

 

Danger of poisoning if oil is ingested/absorbed through the
skin!

Risk of injury if oil comes into contact with eyes and skin!

Important!

Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.

Close off pipe connections with plugs.

Recycling:

Catch and dispose of hydraulic fluid in a suitable container.

Observe country-specific waste-disposal regulations

Necessary preliminary tasks:

Draw off and dispose of hydraulic fluid from fluid reservoir

Remove belt pulley

Lower front axle support

RA  Removing and installing/replacing vane pump for power steering (N54)

BMW AG - TIS

22.02.2013  09:56

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

7 RA Removing And Installing_replacing Vane Pump For Power Steering (N54)|Page 1160 > < 6 RA Checking Function Of Power Steering Vane Pump|Page 1158