5 Series E60 535xi (N54) SAL
67 31 500
Removing and installing/replacing drive unit
for longitudinal seat adjustment
Necessary preliminary tasks:
•
Remove trims for top rail
Disconnect plug connection (1).
Release expander rivets (2).
Installation:
If necessary, replace faulty expander rivets (2).
Note:
View from rear.
Important!
Risk of damage!
Do not kink drive shafts (4).
Lever out guide clip (3).
Raise flange (1) with drive unit for longitudinal seat
adjustment (2) slightly and detach from left drive shaft.
Feed out drive unit for longitudinal seat adjustment (2) in
direction of arrow and detach from right drive shaft.
Installation:
Make sure guide clips (3) and both drive shafts (4) are correctly
seated.
RA Removing and installing/replacing drive unit for longitudinal seat adjustment
BMW AG - TIS
22.02.2013 21:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -