5 Series E60 540i (N62TU) SAL
11 12 005
Removing and installing/sealing left cylinder
head cover (N62/N62TU)
(cylinder bank 5 to 8)
Necessary preliminary tasks:
•
Remove design cover
•
Remove acoustic cover
•
Remove centre engine compartment partition wall
•
Remove ignition coil cover
•
BMW ALPINA B7 vehicles:
-
Remove radial compressor
Note:
For purposes of clarity, the following work steps are shown on the
engine after it has been removed.
Unclip cable holder (1) with cables.
Pull tank venting valve (2) off holder.
Unlock plug (1) and remove.
RA Removing and installing/sealing left cylinder head cover (N62/N62TU)
BMW AG - TIS
22.02.2013 09:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -