5 Series E60 540i (N62TU) SAL
Cylinder bank 5 to 8
Mount conrod on piston in such a way that arrow on piston points
downwards and marking on conrod points upwards.
Install conrod bearing.
Install retaining ring.
Offset the contact points (1) of the piston rings by approx. 120
°
to
each other but do not position above the piston pin boss.
Note:
See illustration.
Illustration shows N52.
Installation:
B40 and B48:
Insert special tools 11 5 440 in conrod.
Installation:
B40:
Prepare piston with rings with special tool 11 5 450 .
RA Removing and installing/replacing all pistons (N62TU)
BMW AG - TIS
22.02.2013 09:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
