5 Series E60 540i (N62TU) SAL
If necessary, replace sensor gear (1).
Release screw (2) and remove sensor gear (1).
Installation:
Installation of exhaust camshaft is described separately from
removal.
Clean all bearings and cams of exhaust camshaft and lubricate
with engine oil.
Note:
Camshaft has a groove and sensor gear has a lug for fastening
purposes.
Fit sensor gear (1) and align to groove in camshaft.
Insert screw (2) and tighten down.
Tightening torque 11 31 14AZ
.
RA Removing and installing/replacing left exhaust camshaft (N62/N62TU)
BMW AG - TIS
22.02.2013 09:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -