5 Series E60 540i (N62TU) SAL
Do not under any circumstances screw in the check valve up
to the mechanical stop. This could damage the valve in the
fuel rail.
Measuring fuel pressure:
-
Connect pressure sensor to DIS Tester
-
Start engine
-
Select Measurement.
-
Multimeter function appears
-
Select Pressure test
-
Read off fuel pressure
Test pressure, refer to Technical Data.
Switch off engine.
Checking fuel pump:
Remove fuel pump relay.
Connect special tool 61 3 050 to terminal (87) and
terminal (30).
Operate button and read off fuel pump delivery pressure at DIS
Tester.
Delivery pressure, refer to Technical Data.
Notes on fuel pressure check.
Installation:
Now clear the fault memory.
RA Checking fuel pump delivery pressure (N62TU2)
BMW AG - TIS
22.02.2013 10:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
