5 Series E60 540i (N62TU) SAL
51 12 810
Removing and installing / replacing
deformation element on bumper carrier on left
or right
Necessary preliminary tasks:
•
Remove carrier for rear bumper trim
Release screws (1).
Remove locator (2) straight towards rear.
Tightening torque 51 12 3AZ
.
Installation:
Foam seal (1) on locator (2) must not be damaged.
RA Removing and installing / replacing deformation element on bumper carrier on lef
BMW AG - TIS
22.02.2013 17:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -