Replacing Line From Evaporator To Condenser on 5 Series E60 540i (N62TU) SAL (S85)
64 53 691
Replacing line from evaporator to condenser
(S85)
Warning!
Risk of injury!
Refrigerant circuit is under high pressure!
Follow safety instructions for handling R 134a refrigerant .
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant oil.
Important!
Risk of damage!
Restart engine only when A/C system has been correctly
filled.
Follow instructions for opening and replacing parts in
refrigerant circuit.
If A/C system is opened for more than 24 hours:
Replace desiccant insert for A/C system
Necessary preliminary tasks:
•
Drawing off, evacuating and filling the A/C system are not
included in the time value given for this work operation
•
Remove fresh air duct
•
Remove right intake filter housing
•
Detach fluid reservoir for power steering and place to one
side.
Feed out rubber grommet (1).
Release nut (2) and detach refrigerant lines (3,4) in direction of
arrow.
Installation:
Make sure rubber grommet (1) is correctly seated.
Replace sealing rings and moisten with refrigerant oil.
Tightening torque 64 53 7AZ
.
RA Replacing line from evaporator to condenser (S85)
BMW AG - TIS
23.02.2013 01:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -