5 Series E60 545i (N62) SAL
Release screws and remove sealing element (2).
Remove sensors (3 and 4).
Installation:
Replace sealing element (2).
Replace sealing rings on sensors (3 and 4).
Removing ignition coils.
Release both grounding cables.
Unlock and detach vent hose.
Unclip cable duct (1) and remove cable from holder.
Remove servomotor for left eccentric shaft.
RA Removing and installing/sealing left cylinder head cover (N62/N62TU)
BMW AG - TIS
22.02.2013 11:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -