5 Series E60 545i (N62) SAL
11 14 151
Replacing crankshaft radial shaft seal (N62 /
N62TU)
Special tools required:
•
11 2 390
(transmission side)
Necessary preliminary tasks:
•
Remove transmission
•
Drain off engine oil
•
Remove flywheel
Release screws (2).
Release screws (1).
Carefully remove end cover.
Important!
The sealing lip of the radial shaft seal is highly sensitive and
must not be kinked.
Do not touch the sealing lip with your fingers.
Note:
Support sleeve (2) is included in scope of delivery.
If the radial shaft seal (1) is stored for longer than six months
without the support sleeve (2), its operational reliability can no
longer be guaranteed and it must not be reused.
RA Replacing crankshaft radial shaft seal (N62 / N62TU)
BMW AG - TIS
22.02.2013 11:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -