5 Series E60 545i (N62) SAL
Installation:
Check vibration damper hub and radial seal, replace if
necessary.
Align groove in vibration damper hub to parallel key and install
vibration damper hub.
Replace central bolt (1).
Tighten down central bolt (1) to joining torque.
Tightening torque 11 23 2AZ
.
Installation:
Fit special tool 11 3 460 on special tool 11 9 451 .
Note:
Special tool 11 3 460 is magnetic.
Installation:
Select 0
°
position and secure special tool 11 9 453 with
clamping screw on socket (special tool 11 9 454 ).
Tighten the central screw with torsion angle.
Tightening torque 11 23 2AZ
.
Assemble engine.
RA Removing and installing/replacing vibration damper hub (N62/N62TU)
BMW AG - TIS
22.02.2013 11:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -