5 Series E60 545i (N62) SAL
11 25 530
Removing and installing/replacing all pistons
(N62)
Special tools required:
•
00 9 120
•
11 8 141
•
11 8 151
•
11 8 152
•
11 9 500
(engine removed)
Removal
Removal of pistons is described separately from installation.
Assembly sequence for removal and installation is different.
Mount engine on assembly stand.
Remove both cylinder heads.
Unscrew oil sump.
Remove oil pump.
Caution!
Re-install piston, connecting rod and bearing shells back in
the same position and in the same installation location.
Conrods and conrod bearing caps are denoted with the same
pairing letters, do not mix them up.
RA Removing and installing/replacing all pistons (N62)
BMW AG - TIS
22.02.2013 11:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -