5 Series E60 545i (N62) SAL
11 31 034
Removing and installing/replacing right inlet
camshaft (N62 from 9/03 and N62TU)
Special tools required:
•
11 9 470
•
11 9 472
•
11 9 473
•
11 9 474
•
11 9 475
•
11 9 480
•
11 9 490
(cylinder bank 1 to 4)
Necessary preliminary tasks:
•
Remove servomotor for right eccentric shaft
•
Remove ignition coils on cylinder bank 1 to 4
•
Remove right cylinder head cover
•
Remove spark plugs on cylinder bank 1 to 4
•
Remove right inlet and exhaust adjustment units
Important!
The inlet camshaft must first be rotated so that when the
bearing bracket is removed the intermediate levers do not slip
out and damage the camshaft.
Rotate inlet camshaft in direction of rotation until cam on 1st
cylinder is positioned horizontally as shown in illustration.
RA Removing and installing/replacing right inlet camshaft (N62 from 9/03 and N62TU)
BMW AG - TIS
22.02.2013 11:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
