5 Series E60 545i (N62) SAL
12
Removing and installing engine compartment
suppression lines (grounding cables)
(N62/TU)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit; if necessary,
work through test schedules
•
Switch off ignition
•
Disconnect battery negative lead
•
If necessary, remove acoustic cover
•
Remove intake hose
•
Remove intake filter housing
Release screw connection (1) of intake filter mounting.
Pull ignition coil covers (2) out of rubber grommets.
Release front screw connection of fuel injector wiring harness,
screw down grounding strap with crimp connection again in
upward direction.
Release ignition coil ground screw connection and screw other
end of grounding strap to ignition coil ground again.
Installation:
Tightening torque 12 52 3AZ
.
The picture shows the right cylinder bank, the procedure for the
left cylinder bank is identical.
Add final details to vehicle, read out fault memory.
RA Removing and installing engine compartment suppression lines (grounding cables)
BMW AG - TIS
22.02.2013 13:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -