5 Series E60 545i (N62) SAL
12 61 285
Replacing engine oil level switch (N62,
N62TU)
Necessary preliminary tasks:
•
Switch off ignition
•
Remove reinforcement plate
•
Drain off engine oil
Illustration shows E65:
Release plug connector (1) and pull off.
Unscrew nuts.
Tightening torque 12 61 2AZ
.
Remove level switch (2).
Installation:
Clean sealing face on oil sump.
Replace seal on level switch.
An excessively low torque value will result in oil leakage, an
excessively high torque value will result in damage to the level
switch.
Top up engine oil.
RA Replacing engine oil level switch (N62, N62TU)
BMW AG - TIS
22.02.2013 13:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -