5 Series E60 545i (N62) SAL
32 41 ...
Replacing suction line for power steering with
Dynamic Drive (N62, N62TU) (from fluid
reservoir to cutting line)
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Close off pipe connections with plugs.
Necessary preliminary tasks:
•
Draw off and dispose of hydraulic fluid from fluid reservoir
•
Remove reinforcement plate
Remove fluid reservoir from mounting bracket/body.
Unfasten hose clip (1).
Disconnect suction line (2) from fluid reservoir.
Installation:
Make sure hydraulic line is laid without tension and with sufficient
spacing to adjoining components.
RA Replacing suction line for power steering with Dynamic Drive (N62, N62TU) (from
BMW AG - TIS
22.02.2013 16:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -