5 Series E60 545i (N62) SAL
Tightening torque 32 41 5AZ
.
Expose return line up to steering gear connection and power
steering cooler connection.
Release quick-connect coupling and seal power steering cooler
connection with a suitable plug.
Installation:
Make sure hydraulic line is laid without tension and with sufficient
spacing to adjoining components.
Release banjo bolt (1) and remove return line (2).
Installation:
Replace all sealing rings.
Make sure hydraulic line is laid without tension and with sufficient
spacing to adjoining components.
Tightening torque 32 41 3AZ
.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Replacing return line for power steering with Dynamic Drive (N62, N62TU)
BMW AG - TIS
22.02.2013 16:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -