5 Series E60 545i (N62) SAL
33 11 091
Replacing drive flange on left or right of rear
differential
Warning!
Risk of burning on the exhaust system!
Important!
When replacing the drive flange, you must also replace the
shaft seal!
Necessary preliminary tasks:
•
Remove output shaft from rear differential and tie back
Drive out drive flange.
Installation:
Insert drive flange and rotate until spline on flange meshes with
teeth on differential bevel gear.
Press drive flange in further until circlip locates with an audible
click.
Important!
High installation forces indicate that the spline teeth on the
drive flange/differential bevel gear are damaged/deformed!
Check spline teeth, replaced damaged parts.
RA Replacing drive flange on left or right of rear differential
BMW AG - TIS
22.02.2013 17:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -