5 Series E60 545i (N62) SAL
Note:
Start by unclipping door trim panel (2) at bottom.
If necessary, wear gloves due to sharp edges on cutout (1).
Firmly pull on cutout (1) of footwell light and thus detach door trim
panel (2) from clips (3).
Carefully unclip door trim panel (1) at top from retainers (3).
Feed door trim panel (1) upwards out of central clip mounting and
release button.
Installation:
Attach central clip mounting to door trim panel.
Prior to installation, bend open retainer on inner door plate for
central clip mounting (2).
Unhook Bowden cable (1) from door lock (2).
Model with side airbag:
Warning!
Disconnect plug connection on side airbag.
RA Removing and installing rear left or right door trim panel (long version or from
BMW AG - TIS
22.02.2013 22:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -