5 Series E60 M5 (S85) SAL
11 0 091
Installing replacement engine (S85)
Necessary preliminary tasks:
•
Remove and install engine.
Note:
Use a 5W-30 engine oil for the running-in procedure in a
replacement engine.
Running-in engine oil must be changed at 2000 km for a 10W-60
engine oil incl. engine oil filter.
Installation:
Modifying check valves, refer to SI-11 01 05 Fault memory
entries in DME.
In engines where it is not possible to connect check valves,
replace the vacuum-controlled check valves with self-opening
check valves.
Vacuum lines will then no longer be required.
RA Installing replacement engine (S85)
BMW AG - TIS
22.02.2013 16:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -