5 Series E60 M5 (S85) SAL
Installation:
Remove support ring from radial shaft seal.
Important!
Sealing lip of radial shaft seal is highly sensitive.
Sealing lip must not be kinked.
Do not touch the sealing lip with your fingers.
Push radial shaft seal (1) uniformly by way of fitting aid
11 7 231 onto special tool 11 5 331 .
Position radial shaft seal approx. 5 mm before crankcase.
Remove special tool 11 7 231 .
Press in radial shaft seal (1) with special tools 11 5 332 and
11 5 333 .
Assemble engine.
Setting time of radial shaft seal approx. 1 hour.
Correct engine oil level if necessary.
RA Replacing front crankshaft radial seal (S85)
BMW AG - TIS
22.02.2013 16:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
