5 Series E60 M5 (S85) SAL
11 14 151
Replacing crankshaft radial seal (S85)
Special tools required:
•
11 5 311
•
11 5 312
•
11 5 313
•
23 0 490
Important!
A radial shaft seal is damaged if it is supplied without a
support bushing.
The sealing lip of the radial shaft seal is highly sensitive and
must not be kinked.
Do not touch the sealing lip with your fingers.
The functional reliability of the radial shaft seal is no longer
guaranteed and it must not be fitted.
Necessary preliminary tasks:
•
Remove transmission.
•
Remove clutch.
•
Remove flywheel.
Drill a 3 mm hole into radial shaft seal.
Important!
Risk of damage! Remove drilling chips immediately
Screw in special tool 23 0 490 .
Drive out radial shaft seal with impact weight.
RA Replacing crankshaft radial seal (S85)
BMW AG - TIS
22.02.2013 16:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
