5 Series E60 M5 (S85) SAL
Important!
Risk of damage! Remove drilling chips immediately
Remove remnants of sealant from sealant outlet (1) on left and
right.
Apply Drei Bond sealant 1209 refer to Electronic Parts
Catalogue) to sealant outlet (1) on left and right.
Important!
Pay attention to adapter sleeve.
Special tool 11 5 311 must rest flat on crankshaft (pay
attention to adapter sleeve).
Mount special tool 11 5 311 with bolts (1).
Position support ring (1) with radial shaft seal (2) on special tool
11 5 311 .
Push radial shaft seal (2) uniformly in direction of arrow over
support ring onto special tool 11 5 311 .
Position radial shaft seal (1) approx. 5 mm before crankcase.
Remove support ring (2).
Note:
Support ring (2) is no longer needed.
RA Replacing crankshaft radial seal (S85)
BMW AG - TIS
22.02.2013 16:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
