5 Series E60 M5 (S85) SAL
Note:
Engine or transmission removed.
Secure special tool 11 9 260 to flywheel (1).
Screw in special tool 11 9 263 with bolt (2) on crankcase.
Release screws (2).
Remove vibration damper (1).
Tightening torque: 11 23 1AZ
.
Note:
Engine or transmission installed.
Attach special tool 11 0 280 to vibration damper.
Support special tool 11 0 280 on holder (1).
Release all stress bolts in direction of arrow.
Installation:
Replace stress bolts.
Support special tool 11 0 280 on holder (1).
Tighten stress bolts with special tool 00 9 120 .
Tightening torque: 11 23 1AZ
.
RA Removing and installing / replacing vibration damper (S85)
BMW AG - TIS
22.02.2013 16:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -