5 Series E60 M5 (S85) SAL
Necessary preliminary tasks:
•
Remove engine.
•
Mount engine on assembly stand.
•
Remove intake air manifold.
•
Remove cylinder head on left and right.
•
Remove engine oil sump.
•
Remove oil pump.
•
Remove VANOS high-pressure pump.
Do not bend oil nozzle (2) at outlets.
It is not possible to adjust the nozzles.
Oil nozzle (2) must be replaced if it is maladjusted or bent.
Release screws (1).
Oil nozzle (2)
Release connecting rod bolts (1) with special tool 12 2 100 .
Remove connecting rod bearing cap with bearing shell.
Special tool 11 5 250 without locating rod must be screwed in
on the connecting rod at the bottom.
Special tool 11 5 250 with locating rod must be screwed in on
the connecting rod at the top.
RA Removing and installing/replacing all pistons (S85)
BMW AG - TIS
22.02.2013 16:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -