5 Series E60 M5 (S85) SAL
Important!
Risk of damage to oil nozzle.
Rotate crankshaft (1) in direction of arrow, risk of damage to
special tool 11 5 250 .
Insert piston with connecting rod and special tool 11 5 250 .
Note:
Depiction of function on cylinders 1-5.
Moisten conrod bearing shell and crank pin slightly with engine oil.
Assemble conrod and crank pin.
Remove special tool 11 5 250 .
Install connecting rod bearing cap with bearing shell.
Secure connecting rod bolts (1) with special tools 12 2 100
and 00 9 120 .
Tightening torque: 11 24 1AZ
.
Assemble engine.
RA Removing and installing/replacing all pistons (S85)
BMW AG - TIS
22.02.2013 16:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -