5 Series E60 M5 (S85) SAL
Position of inlet camshaft, cylinders 1-5.
Designation (E1) on dihedron points upwards.
Position of inlet camshaft, cylinders 6-10.
Designation (E2) on dihedron points upwards.
Rotate exhaust camshaft with open-end wrench (1) at hexagon
head in direction of arrow until special tool A 11 5 301 can be
attached.
Designation (A1) on dihedron points upwards.
Note:
Exhaust VANOS gear (2) adjusted in direction of
arrow (advance).
Rotate exhaust camshaft at hexagon head with an open-end
wrench (2) in direction of arrow until special tool A 11 3 302
can be attached.
Designation (A2) on dihedron points upwards.
Note:
Exhaust VANOS gear (1) adjusted in direction of
arrow (advance).
RA Adjusting camshaft timing (S85)
BMW AG - TIS
22.02.2013 16:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -