5 Series E60 M5 (S85) SAL
Installation:
Check seal for correct seating.
Secure VANOS adjustment unit with screws (1 and 2).
Installation:
Check seal for correct seating.
Secure VANOS adjustment unit with screws (1 and 2).
Tighten down accessible hexagon socket screws of all camshafts
at cylinders 1-5 and 6-10 with and without washers to 10 Nm .
Installation:
Mark all screws which are already tightened down with a coloured
dot.
Important!
Remove all special tools - risk of damage!
Continue cranking engine at central bolt or with special tool
11 5 100 120
°°°°
cms until further hexagon socket screws with and
without washers can be inserted on the VANOS gear and tighten
down to 10 Nm .
Note:
First both the inlet camshafts are moved when the engine is
cranked.
Both exhaust VANOS gears are moved in the direction of the
arrow (retard stop).
RA Adjusting camshaft timing (S85)
BMW AG - TIS
22.02.2013 16:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
