5 Series E60 M5 (S85) SAL
Installation:
Sealing rings (1) cannot be replaced.
If one of the sealing rings (1) is damaged, the solenoid valve
must be replaced.
Lightly lubricate sealing rings (1) with engine oil.
Installation:
Replace sealing ring (1).
Secure sealing ring (1) in groove; if necessary, secure against
falling out with grease.
Assemble engine.
There is air in the VANOS system once it is opened.
In the first few seconds after startup this results in a clearly
discernible "rattling noise".
This rattling noise does "not" indicate incorrect assembly.
The rattling noise will disappear as soon as the oil pressure has
built up and the system has vented.
Carry out venting procedure with diagnosis tester.
Perform VANOS test.
RA Removing and installing / replacing solenoid valves on right VANOS adjustment un
BMW AG - TIS
22.02.2013 16:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
