5 Series E60 M5 (S85) SAL
Remove screw plug for chain rail on left cylinder head.
Installation:
Replace sealing ring.
Tightening torque: 11 12 9AZ
.
Insert special tool 11 5 291 .
Secure bearing pin against falling out with special tool 11 5 292 .
Attach special tool 11 5 382 .
Fit special tool 11 5 410 with bolts (3).
Important!
Release central bolts (1 and 2) with special tools 11 5 410
and 11 5 382 only.
Note:
•
If the special tool 11 5 410 cannot be fitted due to the
hexagon socket screws being unfavourably positioned, it is
necessary to remove the two or if necessary four hexagon
socket screws.
Release central bolts (1 and 2).
Remove special tool 11 5 410 .
Note:
•
If the central bolt is released, the removed hexagon socket
screws are reinstalled with a joining torque of 10 Nm.
Installation:
Replace central bolts (1 and 2).
Important!
Danger of injury!
Installation:
If the VANOS gear is to be reused, the special tool 11 5 382
must not be removed.
VANOS gear is tensioned.
Tilt special tool 11 5 382 in direction of arrow.
If the VANOS gear is to be replaced by a new part, the special
tool 11 5 382 can be removed.
Remove VANOS gear with special tool 11 5 382 .
RA Removing and installing / replacing left inlet VANOS gear (S85)
BMW AG - TIS
22.02.2013 16:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
