5 Series E60 M5 (S85) SAL
Important!
Danger of injury!
Installation:
If the VANOS gear is to be reused, the special tool 11 5 382
must not be removed.
VANOS gear is tensioned.
Tilt special tool 11 5 382 in direction of arrow.
If the VANOS gear is to be replaced by a new part, the special
tool 11 5 382 can be removed.
Remove VANOS gear with special tool 11 5 382 .
Important!
Danger of injury!
Installation:
If the VANOS gear is to be reused, the special tool 11 5 382
must not be removed.
VANOS gear is tensioned.
Set down VANOS gear (1) with special tool (2).
Installation:
If necessary, turn transportation lock on VANOS gear into a
favourable position.
Install exhaust VANOS gear (2) in position.
Installation:
M8x18 hexagon socket screw points upwards.
One of the three screws points downwards.
Insert central bolt, join slightly and then release again through 90
°
.
Remove M8x18 hexagon socket screw or special tool 11 5 370 .
If necessary, remove transportation lock from VANOS gear.
Insert special tool 11 5 382 between outer sleeve and
gearwheel.
Fit special tool 11 5 410 .
Important!
Secure and release central bolt (2) with special tools
11 5 410 and 11 5 382 only.
Risk of damage to VANOS gear.
Tighten central bolt (2).
Tightening torque: 11 36 1AZ
.
Remove special tools 11 5 410 and 11 5 382 .
RA Removing and installing / replacing left exhaust VANOS gear (S85)
BMW AG - TIS
22.02.2013 16:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
