5 Series E60 M5 (S85) SAL
Remove screw plug for chain rail on right cylinder head.
Installation:
Replace sealing ring.
Tightening torque: 11 12 9AZ
.
Insert special tool 11 5 291 .
Secure bearing pin against falling out with special tool 11 5 292 .
Attach special tool 11 5 381 .
Fit special tool 11 5 410 with bolts (3).
Important!
Release central bolts (1 and 2) with special tools 11 5 410
and 11 5 381 only.
Risk of damage to VANOS gear.
Note:
•
If the special tool 11 5 410 cannot be fitted due to the
hexagon socket screws being unfavourably positioned, it is
necessary to remove the two or if necessary four hexagon
socket screws.
Release central bolts (1 and 2).
Remove special tool 11 5 410 .
Note:
•
If the central bolt is released, the removed hexagon socket
screws are reinstalled with a joining torque of 10 Nm.
Installation:
Replace central bolts (1 and 2).
RA Removing and installing / replacing right inlet VANOS gear (S85)
BMW AG - TIS
22.02.2013 16:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
