5 Series E60 M5 (S85) SAL
Release nuts (1 and 2).
Tightening torque: 11 42 3AZ
Detach lines (3 and 4).
Installation:
Replace O-rings.
Slacken nut (2).
Release nuts (3 and 4).
Detach lines (1 and 5).
Installation:
Replace O-rings.
Unscrew nuts (1).
Lift out oil filter housing.
Installation:
Check rubber mount for damage.
Assemble engine.
Park vehicle on a horizontal surface.
Allow engine at normal operating temperature to run for 3 minutes
with increased revs (min. 1000 / max. 1500 rpm).
Read off engine oil level in instrument cluster or on Control
Display.
Top up engine oil if necessary.
RA Removing and installing, sealing/replacing complete main flow oil filter (S85)
BMW AG - TIS
22.02.2013 16:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
