5 Series E60 M5 (S85) SAL
11 78 543
Replacing right oxygen monitor sensor (S85)
Special tools required:
•
11 7 030
Warning!
Scalding hazard!
Only perform these tasks after exhaust system has cooled
down.
Necessary preliminary tasks:
•
Read out fault memory in Digital Motor Electronics (DME).
•
Remove transmission underbody protection.
Remove oxygen monitor sensor (1) with special tool 11 7 030 .
Installation:
If the oxygen monitor sensor is reused, apply a thin and even coat
of Never Seez Compound (refer to BMW Parts Service) to the
thread only.
The part of the the oxygen monitor sensor which projects into the
exhaust system branch (sensor ceramic) must not be cleaned or
come into contact with lubricant.
RA Replacing right oxygen monitor sensor (S85)
BMW AG - TIS
22.02.2013 17:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
