5 Series E60 M5 (S85) SAL
Install double-plate clutch with special tool 21 2 300 .
Marking (1) on double-plate clutch.
Marking (2) on dual-mass flywheel.
Installation:
Both markings (1 and 2) must be offset by 180
°
(a tolerance of 10
°
-20
°
is possible) to each other.
Double-plate clutch and dual-mass flywheel are matched to each
other.
Insert all bolts.
Tighten down bolts uniformly in 1/2 turns.
Observe tightening sequence 1 to 9.
Tightening torque: 21 21 1AZ
.
Note:
Illustration does not show special tool.
Installation:
Release retaining ring (1) with a suitable tool in direction of arrow.
Retaining ring (1) is only supplied with a new double-plate clutch.
Retaining ring (1) is no longer needed.
RA Removing and installing/replacing clutch (GS7S47BG SMG)
BMW AG - TIS
22.02.2013 18:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
