5 Series E60 M5 (S85) SAL
Note:
Pressure line of clutch slave cylinder remains connected.
Important!
Relieve tension on clutch slave cylinder slowly; otherwise air
will be drawn in through sealing sleeve.
Release nuts and remove clutch slave cylinder.
Tightening torque 21 52 5AZ
.
Lever out retainer (1).
Disengage shift rod (2).
Installation:
Grease shift rod.
Grease, refer to BMW Service Operating Fluids.
Make sure shims (3) are in correct position.
Unlock bearing pin (1) in direction of arrow and remove.
Lift out shift arm.
Installation:
Grease bearing pins (1).
Grease, refer to BMW Service Operating Fluids.
Unlock plug (1) of zero-gear sensor (ON TRANSMISSION) and
disconnect.
RA Removing and installing transmission (GS6-53BZ) (S85)
BMW AG - TIS
22.02.2013 18:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
