5 Series E60 M5 (S85) SAL
23 12 057
Replacing radial shaft seal for output flange
(GS7S47BG)
Special tools required:
•
23 0 020
•
23 0 490
•
23 1 210
•
23 4 110
•
31 2 106
Important!
After completion of work, check transmission oil level.
Use only approved transmission oil.
Failure to comply with this instruction will result in serious
damage to the transmission.
Necessary preliminary tasks:
•
Remove propeller shaft.
Brace output flange with special tool 23 0 020 .
Unfasten collar nut with special tool 23 1 210 .
Tightening torque 23 21 1AZ
.
Important!
Do not drive on flange.
Secure bolt with Loctite 243.
-
Loctite 243: BMW Parts Service.
RA Replacing radial shaft seal for output flange (GS7S47BG)
BMW AG - TIS
22.02.2013 18:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -