5 Series E60 M5 (S85) SAL
Drive a hole into radial shaft seal (1) using a centre punch.
Important!
Do not use a drill as drillings may result in transmission
malfunction.
Screw in special tool 23 0 490 .
Drive out radial shaft seal (1) with impact weight (2).
Installation:
Coat sealing lips of radial seal with gear oil.
Push radial seal (1) onto drive shaft up to housing.
Drive in radial seal (1) as far as it will go with special tool
23 3 240 and plastic hammer.
RA Replacing radial shaft seal for drive shaft (GS6-53BZ) (S85)
BMW AG - TIS
22.02.2013 18:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
