5 Series E60 M5 (S85) SAL
31 10 010
Removing and installing/replacing
reinforcement plate
Important!
Observe safety instructions for raising the vehicle
Driving without reinforcement plate is not permitted!
Necessary preliminary tasks:
•
Remove underbody protective plate
Release screws (1) and remove reinforcement plate.
Installation:
Replace screws and insertion nuts.
Tightening torque 31 10 9AZ
.
Replacement:
If applicable, remove heat shield.
RA Removing and installing/replacing reinforcement plate
BMW AG - TIS
22.02.2013 19:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
