5 Series E60 M5 (S85) SAL
Centering pin missing: Make position of studs in relation to wheel
arch.
Secure spring strut against falling out.
Unscrew nuts.
Remove spring strut downwards out of wheel arch.
Installation:
Align spring strut using centering pin to bore in wheel arch or
studs to wheel arch and push upwards.
Replace self-locking nuts.
Tightening torque 31 31 1AZ
.
After installation:
•
Carry out wheel alignment check if a spring strut with support
bearing was or has been installed without centering pin.
RA Removing and installing complete left or right spring strut shock absorber
BMW AG - TIS
22.02.2013 19:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
