5 Series E60 M5 (S85) SAL
32 31 102
Replacing steering spindle sleeve
Necessary preliminary tasks:
•
Remove lower section of steering spindle
•
Remove accelerator pedal module
Remove sleeve (1) from bulkhead.
Installation:
Coat sleeve from outside with silicone grease and insert from
passenger compartment. Arrow (1) on sleeve must point
horizontally to left.
Check seating of sleeve in bulkhead, correct if necessary.
After installation:
•
Carry out steering angle sensor adjustment/adjustment for
active front steering
RA Replacing steering spindle sleeve
BMW AG - TIS
22.02.2013 20:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
